Duties and Responsibilities:

• Operate, service, and maintain heavy equipment including front-end loaders, off road dump trucks, skid steer, man-lift, fuel truck and water truck in order to keep plant clean and in production

```{=html}

``` - - Responsible for fueling, oiling, greasing equipment as well as understanding the equipment's safety manual - Perform pre-shift and end of shift checks and maintenance on equipment

• Perform assigned plant rounds; inspect, monitor, troubleshoot, performance test and document plant processes.

• Operate and adjust treatment plant pumps, motors, feeders and other equipment to maintain appropriate plant operations.

• Maintain plant maintenance including but not limited to daily shoveling, sweeping, general plant housekeeping, and any necessary repairs or services to mobile and stationary equipment

• Use gas or electrical welding equipment to weld, braze, and or cut

```{=html}

``` - Perform needed hot work, including welding and cutting

```{=html}

``` - Determine proper rod selection for welding either ferrous or non-ferrous material - Must have the ability to fabricate components from instructions on blueprints - Have the ability to troubleshoot and/or repair bearings, speed reducers, shafts, pulleys, couplings, sheaves, and belts - Have the ability to troubleshoot and/or repair crushing, screening, and conveying equipment - Maintain plant maintenance including but not limited to daily shoveling, sweeping, general plant housekeeping, and any necessary repairs or services to mobile and stationary equipment.

```{=html}

``` - Report orally and in writing to as required and maintain accurate records (i.e. activity reports, inventory reports, maintenance logs, etc.) as directed. - Participate in general training, job specific training and hazardous materials training as required; successfully complete written examinations as required. - Understand and follow all policies, procedures and safety rules as applicable to facility, job function and equipment.

```{=html}

``` - Ensure the proper safety incident procedures and reporting processes are followed, bringing safety concerns to the attention of the Plant Manager - Communicate with management and staff on conditions of stationary and mobile equipment, as well as any possible improvements or ideas - Operate plant when necessary

Requirements:

• Ability to service all stationary equipment units with the help of service and OEM manuals
• Must have the skills and safety mindset to work in close proximity with Crane and Boom trucks
• MSHA certified, part 46 preferred

```{=html}

``` - Experience in mining industry with some knowledge of proper use of equipment, materials and supplies used in mining is preferred

```{=html}

``` - Ability to be trained to complete tasks in a safe and effective manner - Use gas or electrical welding equipment to weld, braze, and or cut - Determine proper rod selection for welding either ferrous or non-ferrous material - Must have the ability to fabricate components from instructions on blueprints - Have the ability to repair bearings, speed reducers, shafts, pulleys, couplings, sheaves, and belts - Have the ability to repair crushing, screening, and conveying equipment - Must maintain regular, dependable attendance and a high level of performance - Follow written and verbal directions to complete assigned tasks on schedule. - Read, write, and communicate in English and understand basic math. - Complete all applicable documentation, recordkeeping and daily inventory. - Participate in safety briefings, job briefings, and any other pass on information from team members, management or customer. - Must be able to work with a team, take direction and follow work rules, as well as, take on additional job responsibilities as needed or ssigned. - Flexibility required; ability to work days, nights, weekends. - Flexibility and willingness to travel and work at other US Aggregates locations as needed. - Perform all work in compliance with Company standards, procedures, and regulatory requirements. - Self-motivation and team orientation - Problem solving skills - Computer skills, including experience in Excel and other Microsoft Office software.

```{=html}

``` - High school diploma or equivalent

```{=html}

``` - Perform other duties as assigned

Physical Requirements:

• Must have the ability to continuously stand or walk on level or uneven ground.
• Must have the ability to ascend and descend ladders, stairways and incline catwalks.
• Must have the ability to bend, crouch and/or kneel at waist or knees.
• Must have the ability to lift, push, pull, or carry up to 50lbs.
• Ability to work outside majority of the time and withstand extreme weather conditions.Exposure to hot, cold, wet, humid, or windy conditions caused by the weather.

This position will work at both Crawfordsville and Thorntown operations

EOE/M/W/Vet/Disabled/PDA

#USAGG

For more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

https://thgrp.applicantpool.com/jobs/1086337-261660.html

Duties and Responsibilities:

• Operate, service, and maintain heavy equipment including front-end loaders, off road dump trucks, skid steer, man-lift, fuel truck and water truck in order to keep plant clean and in production

```{=html}

``` - - Responsible for fueling, oiling, greasing equipment as well as understanding the equipment's safety manual - Perform pre-shift and end of shift checks and maintenance on equipment

• Perform assigned plant rounds; inspect, monitor, troubleshoot, performance test and document plant processes.

• Operate and adjust treatment plant pumps, motors, feeders and other equipment to maintain appropriate plant operations.

• Maintain plant maintenance including but not limited to daily shoveling, sweeping, general plant housekeeping, and any necessary repairs or services to mobile and stationary equipment

• Use gas or electrical welding equipment to weld, braze, and or cut

```{=html}

``` - Perform needed hot work, including welding and cutting

```{=html}

``` - Determine proper rod selection for welding either ferrous or non-ferrous material - Must have the ability to fabricate components from instructions on blueprints - Have the ability to troubleshoot and/or repair bearings, speed reducers, shafts, pulleys, couplings, sheaves, and belts - Have the ability to troubleshoot and/or repair crushing, screening, and conveying equipment - Maintain plant maintenance including but not limited to daily shoveling, sweeping, general plant housekeeping, and any necessary repairs or services to mobile and stationary equipment.

```{=html}

``` - Report orally and in writing to as required and maintain accurate records (i.e. activity reports, inventory reports, maintenance logs, etc.) as directed. - Participate in general training, job specific training and hazardous materials training as required; successfully complete written examinations as required. - Understand and follow all policies, procedures and safety rules as applicable to facility, job function and equipment.

Ensure the proper safety incident procedures and reporting processes are followed, bringing safety concerns to the attention of the Plant Manager

Communicate with management and staff on conditions of stationary and mobile equipment, as well as any possible improvements or ideas

Operate plant when necessar